Saturday, December 31, 2011

Link!

"Link" is a modern take on the classic 80's game. Build bridges using wood and steel girders, and in more advanced levels with stone blocks and rope cables.

As a 19th-century industrialist, you're building trains across the great West. The expansion of America depends on the delivery of coal, lumber, crates, animals, and of course passengers across a variety of valleys, ditches, waterways, and canyons.

Link uses some of the principles of civil engineering to create stable structures. Creating bridges using randomly-connected girders, cables, and stone will probably result in a lot of casualties. Instead, you'll need to think like a designer. Will a rectangular or triangular girder structure provide less strain on the girder joints? Does it make more sense to attach cables near the beginning and end, or near the middle? If there is no place to attach cables, what type of structure can you build on which to attach cables?

You should also consider the physical properties of wood vs. steel. Steel is heavier and sturdier, while wood is lighter but probably not able to handle as much stress. Concrete is the heaviest and sturdiest of all construction elements, but you have a limited number of blocks to use and a limited number of places to put them. Cables provide some additional support from above, but they are also limited, and in some cases you will need to build a support structure for them.

With 40 levels and counting, Link will provide you with days of enjoyment and frustration. But in each level, you have a limited number of construction elements and structural anchors. On levels with concrete blocks, the tops of blocks also provide additional anchor points. Use these blocks carefully, though! An improperly placed anchor can make all the difference between success and failure.

Several user controls are available, including zoom in/zoom out, grid overlay toggle, show/hide bottom controls, reset the entire level, undo, and delete (the "X" icon). This should be fairly obvious based on the icon. At the far right, bottom corner is an up/down arrow to toggle the bottom control bar display.

Many of us have built bridges with toothpicks in school projects, or created a sturdy structure with a limited number of tools and materials. We all know how challenging - and rewarding - this can be. Now you can have that kind of fun in your pocket or purse all the time with Link!

If you believe that you have achieved an optimal bridge for the level, please take a screenshot of your bridge (or just a normal camera picture!), and post it to the Link Facebook wall at:

http://www.facebook.com/linkgame

Or, if you're having difficulty finding a good solution for a particular level, check our Facebook page for ideas and comments from other Link users.
What's new in Version 1.2
Level 25 has been updated (it's now actually possible to do it!) 




 

Always Up! Pro

Awesome arcade jumper with puzzle elements! Collect stars to move forward!
★★★★★ "It's like what would happen if they turned doodle jump into a puzzle game."★★★★★ "A great mix of cut the rope and doodle jump into a very professional highly polished looking game."

Key Features:
· nice mix of arcade and puzzle,
· simple and addictive gameplay with 96 brain smashing levels in 6 amazing worlds,
· stunning Retina graphics,
· 23 achievements with Game Center integration,
· this universal app works on iPad, iPhone and iPod touch.
What's new in Version 1.3
· New world "Christmas"! 
Thanks for your reviews!
Follow us on Twitter for updates:
@dieselpuppet (http://twitter.com/dieselpuppet)
Merry Christmas and Happy New Year! 




Friday, December 30, 2011

Sprinkle: Water splashing fire fighting fun!

Ready, Aim, Squirt! Can you handle 60 levels of splashing excitement?

"Gaming App of the Day" - KOTAKU

"Wonderful concept, realistic water, adorable aliens, catchy music, satisfying play" - MODOJO

"Sprinkle makes fighting fire with physics (and water, of course) a heck of a lot of fun" - 148Apps

"the game quickly made its way to every member of my family" - ArsTechnica

"the game is surprisingly well done and designed, and the gameplay will keep you entertained until you run out" - TheAppEra

* * * * *

Using a water cannon mounted on a crane, players must adjust the height and angle of the cannon to fight fires, move obstacles, spin wheels and activate traps in this challenging water-physics based puzzler! But squirt carefully as you will run out of water and the less water you use, the more drops you earn!

Using some of the most realistic water physics seen on an iOS device yet, Sprinkle is a brain-teasing game that will have players straining to figure out each puzzle and obstacle.

Sprinkle features:

Amazing water physics – Some of the most realistic water physics ever seen on an iOS device make Sprinkle an exciting and addictive puzzler.

Brain-teasing puzzles – What starts as simply pointing and spraying to quench each fire becomes much more challenging, as players must overcome the intricacies of each puzzle before time and water run out.

Blocks, boulders, and cogs oh my – Use the power of your water cannon to move blocks of ice and boulders, spin giant cogs, and depress traps inorder to reach and extinguish every last fire.

The inhabitants of Titan, a moon of Saturn, lived out their days peacefully in their straw hut homes – until space tourists from Earth crashed through Saturn’s rings, bringing a storm of flaming asteroids crashing down on the Titans. To combat the widespread fires threatening their homes, the Titans have built a massive water cannon. And they need you to man it!
What's new in Version 1.7
* The Winter World with twelve tricky levels!
* iCloud support for synchronizing multiple devices
* Option to unlock all worlds and levels instantly 
 



 
 

Ascension: Chronicle of the Godslayer

2011 Golden Geek award winner (Best Mobile/Handheld Game)

Ascension: Chronicle of the Godslayer, is the first officially licensed deck building card game for iOS. Play alone or with friends to battle against the Fallen One for honor and victory. Conceived and designed by three Magic: the Gathering tournament champions, Ascension will provide hours of engaging and strategic game play for enthusiast and experienced gamers alike.

Highlights
•Universal Application: Play on iPhone 3Gs, iPhone 4, iPad, iPad 2, iPod Touch 3, or iPod Touch for a single low price.
•1st officially licensed deck building game for iPhone and iPad.
•Over 50 beautifully detailed cards, hand drawn by Eric Sabee.
•Full asynchronous support for multiplayer online games.
•Play against multiple A.I. opponents using varied strategies.
•Introductory tutorial to teach you how to play.
•Enhanced visual optimization for iPhone 4 and iPad using high resolution graphics designed for the retina display

What's new in Version 1.0.1
* Fixed In-App Purchase for Return of the Fallen
* Fixed bug preventing play on iPod Touch 2G
* Added 14 day timer option for Online Games
* Fixed audio bug when forfeiting a game

New Online Game Features:
• Player Profiles
• Player Clocks
• Rematch Invitations

Ascension: Return of the Fallen

Ascension: Return of the Fallen is the first in-app expansion for the popular deck building iOS game Ascension: Chronicle of the Godlsayer and introduces new game mechanics.

Ascension: Return of the Fallen can be played as either a stand-alone game (2 player) or played as an expansion for Ascension: Chronicle of the Godslayer.
Ascension: Return of the Fallen is quick to learn and easy to play.

Game play revolves around a Center Deck containing Heroes, Constructs and Monsters; and players take turns recruiting Heroes or Constructs for their decks or defeating Monsters to earn honor and ultimate victory. New cards are revealed every turn, forcing players to react and ensuring that each game is dynamic and unique.

Samael the Fallen God has returned in his true form, and is intent on obliterating your world. Will you be able to overcome monstrous obstacles and assemble a mighty army to end Samael’s reign once and for all?

Highlights of Return of the Fallen
• Available for In-App Purchase
• New Fate Mechanic
• New Faction cards

 

Download VERSION 1.0.1: http://www.mediafire.com/?hbda302g02w7tg2

Sunday, December 25, 2011

How to Install Windows 7 - Complete Round of Installation Guides

Windows 7 is most probably Microsoft's easiest to install operating system. It seems that the company has learned from past mistakes and now almost everyone can install Windows 7 on their computer by themselves, provided that the computer complies with the minimum system requirements. In this blog post, I will share with you the best Windows 7 installation guides that can be found on the internet. Apart from installing Windows 7 from scratch, there are situations when you will want your new operating system to run in parallel with another one, be it Mac or Ubuntu Linux. In this post I will cover the following installation scenarios: installing Windows 7 from scratch, upgrading from Windows Vista or Windows XP, as well as dual-booting with Windows XP, Windows Vista, Mac OS X Leopard and Ubuntu Linux.

Installing Windows 7 from Scratch

A clean install is the term used to describe a situation in which you install Windows 7 on a clean partition, or on a partition that you plan to format. If you do have data on that partition, be it an old operating system or other files, you must know that this data will be lost during the process. About.com's Guide How to Perform a Clean Installation of Windows 7 takes you through all the necessary steps when installing Windows 7 from a DVD.
It goes from inserting the DVD and booting from it, through deleting the partition (if it is occupied by another operating system), the actual installation process and booting Windows 7 for the first time. It's a great 34-step guide and it shares everything you should expect to see during installation and what to do when you see it. As long as you have another computer on hand to show the guide, you're all set and ready to go.
Windows 7 Installation
The funny thing is that some users have discovered a while ago that there is a workaround that allows you to perform a clean install of Windows 7 by using an upgrade disc, thus saving up to 100$ by not paying for the full version. If you think you're up to it, this guide called Clean Install Windows 7 with Upgrade Media: The Answer provides the way to do it. Even more, Microsoft has confirmed that this workaround is perfectly legal, in certain situations. There is an article called Clean install with Windows 7 upgrade media? Get the facts! on Zdnet, that details all of these situations very well. Even if this is relatively easy to do, if you work for a company, the Business Software Alliance just might pay you a visit. The article tells you the situations in which it is OK and legal to install a fresh copy of Windows 7 like this. Basically, if you purchased a computer with Windows XP or Windows Vista pre-installed, you qualify for the upgrade. On the other hand, if you have a Mac and want to install it using Boot Camp, if you want to run Windows 7 in a virtual machine, you want to dual-boot Windows 7 with Windows Vista or Windows XP, or you made your PC out of separate parts and want to install Windows 7 this way, you don't qualify for an upgrade.

Upgrade from Windows Vista to Windows 7

This is quite an easy process, Windows 7 being the "next in line" after Windows Vista in terms of Microsoft operating systems. This is why Microsoft provides the easiest to use guide for this procedure. It is a two step guide, called Upgrading from Windows Vista to Windows 7 and it explains the process in all of its stages. Of course, they also tell you to print out the guide, in case you don't have another computer that's connected to the Internet somewhere close.
This guide also tells you which Windows 7 version would be suitable for you, depending on the Windows Vista version you're running. The good side of upgrading this way is that you get to keep your files and most of your settings. It's a smoother transition.

Upgrade from Windows XP to Windows 7

We know that there are a lot of people out there who still use Windows XP. There can be a lot of reasons for this, but some of these people would like to move to Windows 7. That's not a possibility that Microsoft offers. Fact is that so many things have changed since Windows XP's heyday that it would have been too complicated to do it: registry settings and even the kernel (the core of the operating system) are so different in Windows 7 that it just didn't seem to be worth it.
Of course, there would be a way to get from Windows XP to Windows 7, but it involves upgrading to Vista first, and we don't know if it's worth the effort. A clean install would probably be a better option. If you insist of upgrading from Windows XP to Windows 7 directly, the CNET guide called Upgrade Windows XP to Windows 7 tells you how to do this. It's a step by step process, but it is not an easy one. You are warned to backup your whole hard drive and to have install disks of your essential programs in your proximity. So make sure you follow it closely and listen to all instructions.

Dual-boot Windows 7 with Windows XP and Windows Vista

Maybe you're still not certain that you want to completely make your transition to Windows 7 from your installation of Windows XP or Windows Vista. That's fine, we got you covered. We found this great guide (hailing from the beta days of Windows 7), that tells you the steps to dual-boot Windows 7 with Windows Vista or Windows XP. It is called Dual Boot Windows 7 with XP/Vista in three easy steps. Since things tend to be quite different in terms of partitioning in Windows XP and Windows Vista, this guide explains the process of creating a new partition, so that you're covered, no matter what Windows version you're using.
If you have programs that only run in Windows XP and you want to run them in Windows 7, you must take into account that Windows 7 has a very handy feature called Windows XP Mode and you can find all of the details you need about working with it on 7 Tutorials, in this article, called How to work with Windows XP Mode. Also, you'll get references to other related articles which will teach you all there is to know about it.

Dual-boot Windows 7 and Mac OSX Leopard

This might not sound like the easiest of tasks, but assuming that you really want to use both of these operating systems on your PC, you'll just have to go through a few steps (and backup everything before you do that). We are talking about Mac OS X Leopard, Apple's latest offering in terms of operating systems. A thorough Google search will provide you with some guides to install previous versions, too.
I found a great guide to do this on thegadgets.net, called How To: Dual Boot Mac OS X Snow Leopard and Windows 7 on a PC. You'll need to repartition your hard drive, and Mac OS X Leopard will be the one to be installed first. The good news is that no hacks are required. If you've installed Apple's operating system, you should be just fine. If you need a guide to do this, I found one for you on Lifehacker, called Install Snow Leopard on Your Hackintosh PC, No Hacking Required.
Then, you will have to install Windows 7. After that, you just have to boot into Windows 7, download Easy BCD and use it to dual-boot Mac OS X Snow Leopard and Windows 7.
Windows 7 Installation

Dual-boot Windows 7 and Ubuntu Linux

The most thoroughly explained guide can be found on Lifehacker. They have an easy step-by-step guide which will get you through the whole process without any problems. You just need a backup (as always), a CD of the latest Ubuntu Linux, your Windows 7 installation DVD and about two hours of your precious time. The guide tells you what to do if Windows 7 is already installed on your system, or if you want to start it all from scratch.
It is not as easy as dual-booting Windows 7 and Mac OS X Leopard, but if you print out the instructions and follow them closely, you shouldn't have any problems. Still, backing up is very advised. The fantastic thing about this guide is that, even more than allowing you to use the two operating systems, it allows you to share files and folders between them, even Firefox profiles. And all of this without any conflicts. Dual-Boot Windows 7 and Ubuntu in Perfect Harmony is the name of this very thorough guide.
Windows 7 Installation

To sum it all up...

As you will see from these guides and your own experience, Windows 7 is Microsoft's easiest to install operating system. Even if you want to make it work alongside other operating systems, Microsoft-made (Windows XP, Windows Vista) or not (Mac OS X Leopard, Ubuntu Linux), the procedure is not that complicated.
Before I close this article, I would like to know how was your Windows 7 installation experience. Did it go smoothly? Also, have you found any other interesting guides that you would like to share with others?

How to Customize Network Sharing Settings in Windows 7

I will continue our series on Windows 7 networking with an article about how to set your network sharing settings. Compared to older versions of Windows, Windows 7 makes it is easier to set such settings. In this article I will cover the following: where to find the network sharing settings, how to turn on or off network discovery, file sharing, media streaming, password protection, how to set encryption for sharing connections and how to configure HomeGroup connections.

Where to Find the Network Sharing Settings

First, you have to open the Network and Sharing Center. On the left side of its window, there is a link called 'Change advanced sharing settings'. Click on it and the appropriate window will open. An alternative is to search for the word sharing in the Start Menu search box. One of the first search results will be called 'Manage advanced sharing settings'. Click on it and the 'Advanced sharing settings' window will open.
Network Sharing Settings
In the 'Advanced sharing settings' window you will see lots of settings, split in two categories: Home or Work and Public.
Network Sharing Settings
These categories have some arrows on the right side of their top row. If you click on it, the category will minimize or expand.
Network Sharing Settings
First, you will need to modify the settings of the current profile, whatever that might be. You can change the sharing settings for the other profile too and they will be applied once you connect to a network to which that profile applies. Next, I will be describing all available settings one by one and give you recommendations for how to configure them.

Turn On or Off Network Discovery

The first setting from the list is called Network Discovery. When it is turned on, this setting allows your computer to search for other devices on the network it is connected to. Also, it allows other computers on the same network to find it.
Network Sharing Settings
Recommendation: If you are connected to a home or work network, it is best to turn on this settings. For public networks, it is best to turn it off so that your computer won't be visible to other computers.

Turn On or Off File & Printer Sharing

Next, you can enable or disable the file & printer sharing. When turned on, this feature allows you to share content with other computers from your network. With it turned off, you won't be able to share anything. Even if your computer is visible for other devices on the network, nobody will be able to access any shared files or folders.
Network Sharing Settings
Recommendation: Turn it on for home or work networks. Turn it off for public networks.

Turn On or Off Public Folder Sharing

One way to share files and folders is to move them to the so called Windows 7 Public folders. These are found in 'C:\Users\Public\'. If this option is turned on, anything that you copy to those folders will be visible to other computers on your network.
Network Sharing Settings
Recommendation: Turn it off. Personally, I don't need this feature. I prefer to share directly the files and folders I want to have shared, without having to copy them to another location. In the end it is a matter of personal work style. If you find these public folders useful, you can turn the feature on. However, on public networks it is highly recommended to turn this feature off.

Turn On or Off Media Streaming

The next setting is about media streaming. This feature allows you to stream multimedia files (pictures, video, music) by using Windows Media Player. In this section, Windows 7 it will tell you if it is turned on or off. If you want to change the current status, click on the 'Choose media streaming options' link.
Network Sharing Settings
If it is turned on, you will see a window listing your computer and others from your network which have media streaming enabled. If you don't need to use such a feature, you can disable it by clicking on the 'Block All' button and then on OK.
Network Sharing Settings
If media streaming is turned off and you will be asked to turn it on. Click on 'Turn on media streaming'. Then, you will see a window similar to the one above, where you can edit your media streaming settings.
Network Sharing Settings
Recommendation: Turn it on only if you use media streaming. For public networks always turn it off.
We will cover more about media streaming and how to use it in a separate article, dedicated only to this topic. So, stay tuned for future updates on our site.

Encryption for File Sharing Connections

The next setting is about the type encryption used for file sharing connections, when computers connect to each other and copy files and folders from one to the other. By default, this is set to 128-bit encryption.
Network Sharing Settings
Recommendation: Leave it set to 128-bit encryption, unless you have issues with some older devices or computers with operating systems which cannot properly access your shared files and folders.

Turn On or Off Password Protected Sharing

Password protected sharing allows people to access your shared files and folders only if they have a user account and password set on your computer. If they don't know such details, they cannot connect to your shared items. This feature comes into play with computers which are not included in your HomeGroup (in case you defined one) or for computers for a public network.
Network Sharing Settings
Recommendation: Turn it on at all times.

Configure HomeGroup Connections

We've covered the HomeGroup feature extensively in one of our previous articles. By default, a HomeGroup has its own password which all computers who join it, must know. If you happen to use the same username and password on all computers from the HomeGroup, you can set Windows 7 to use that, instead of the separate HomeGroup password. However, this is not a recommended practice. Using the same username and password across all your HomeGroup computers can be a security risk.
Network Sharing Settings
Recommendation: Use only 'Allow Windows to manage homegroup connections'.

Conclusion

As you can see, setting network sharing settings is not very complicated. What you need to remember in terms of best practices is that everything should be turned off when you are connecting to public networks. This way you will avoid for your files and folders to be access by unauthorized persons. Also, for home or work networks, turn on only the features you are actually using. If you've got some other interesting things to share, don't hesitate to leave a comment.

The HomeGroup Feature & How it Works

HomeGroup is a new feature introduced by Windows 7 which aims to simplify the process of sharing content and devices on your home network. In older versions of Windows, sharing content was a tedious and sometimes painful process, especially for home users. By using HomeGroups, you can now access all shared content in your home network with just one click. I know it sounds too good to be true. That's why, in this article, I will show what a HomeGroup is, how it works, how to create one and join your home computers to it. Also, I'll show how to change the password of your HomeGroup and how to retrieve it in case you forgot it.

What is a HomeGroup

HomeGroup is a feature designed to be available for computers connected to a Home network. Each time you connect your computer to a new network, Windows 7 asks what type of network it is. If you select 'Home network', it means you are in a trusted network of computers, and Windows 7 allows you to use the HomeGroupfeature. What this feature does, is to allow all your home computers with Windows 7 installed to easily connect between them and share content.
HomeGroup
To be more exact, all computers with Windows 7 which are in the same HomeGroup, will be sharing files, folder, devices and media without having to type passwords every time you want to access something, like it happened with older versions of Windows. You select on each computer what you want to share and everybody else can access it with a few clicks.
To access the HomeGroup control panel go to 'Control Panel -> Network and Internet -> HomeGroup'.
NOTE: the HomeGroup feature is not available for Public or Work networks and it doesn't work for computers not having Windows 7 installed, even if they are part of the same home network. HomeGroups can be created only between computers with Windows 7 installed.

How to Create a HomeGroup

First, you need to open up the Network and Sharing Center. If you don't know how to do this, check our guide. In the Network and Sharing Center window, there is a section called 'View your active networks'. There you will see the network you are connected to, its type and if you have already joined a HomeGroup or not. If there is no HomeGroup defined in your network, you will see a line which says 'HomeGroup: Ready to create'.
HomeGroup
NOTE: If you have joined a HomeGroup and you want to create another one, you need to first leave the current HomeGroup and then create another one.
To create the HomeGroup, click on 'Ready to create' or on the HomeGroup link found on the bottom left-side of the window.
HomeGroup
Now the HomeGroup creation wizard will start. First, click on 'Create a homegroup'.
HomeGroup
Then, it is time to select what you want to share. You will see only a limited list of libraries: Pictures, Documents, Music and Videos. Also, you'll be allowed to share your printers. Check the items you want to share and click on Next. One thing you should keep in mind is the fact that, at this step, you can share only your libraries and printers. If you are not familiar with the concept of libraries, don't hesitate to read our guide called Libraries - A Great Feature of Windows 7. As you will see, libraries are different than normal folders such as My Documents from Windows XP, for example. Also, adding more folders to the list of shared items, can be done later on and we will show how to control what you are sharing on your HomeGroup in a separate article.
HomeGroup
After a few seconds, Windows 7 will show you the password of the HomeGroup. Unfortunately it cannot be changed at this step. If you want to change it, then it's OK to click on Finish, without writing it down. If you decide to keep this automatically generated password, then write it down or print it using the link below the password. When done, click on Finish.
HomeGroup
The HomeGroup was created and other computers from your network can join it. At the end of the wizard, you will return to the HomeGroup window, where you will see a list of options available.
HomeGroup
You can either change any of them or just close the window and join other computers to the HomeGroup.

How to Change the Password of a HomeGroup

Changing the password of the HomeGroup can be done from any computer which joined it. Problem is, if you change it after your home computers joined the HomeGroup, you will have to re-type it on all computers in order for them to join again. If you change the password before joining other computers, then you don't have to re-join them.
To change the password of your HomeGroup, open the HomeGroup window by clicking on the link found on the bottom left-side of the Network and Sharing Center window. Then, click on 'Change the password'.
HomeGroup
A wizard will start asking what you want to do. Click on 'Change the password'.
HomeGroup
By default, Windows 7 will generate a new random password. If you want to, you can also type a password you desire. Just make sure it is at least eight characters long. When done, click on Next.
HomeGroup
Then, Windows 7 will notify you that the password was changed. Click on Finish and you are done.

Where to Find Your HomeGroup Password

If you want to add another computer to the HomeGroup but you forgot the password, you can access it very easily. Start one of the PCs which is part of the HomeGroup, go to the HomeGroup control panel and click on the link that says 'View or print the homegroup password'.
HomeGroup
The password will be now shown in the yellow box. You can either write it down or print it by using the 'Print this page' button.
HomeGroup
When done, close the window.

How to Join a HomeGroup

After the HomeGroup was created, it is time to join other computers. When you open the Network and Sharing Center, you will see a line of text saying 'HomeGroup: Available to join'. Click on it or on the HomeGroup link.
HomeGroup
In the next window, click on 'Join now'.
HomeGroup
Now it's time to select what libraries and devices you want to share. When done, click on Next.
HomeGroup
Then, you need to type the password of the HomeGroup and click on Next.
HomeGroup
At the end, you will receive a notification that the computer has joined the HomeGroup. Click on Finish and you are done.
HomeGroup
Repeat this procedure for all the other computers from your home network.

How to Access HomeGroup Computers

Once the HomeGroup is created and all computers are joined, accessing their shared libraries and devices is very easy. Just open up Windows Explorer and click on Homegroup. There you will see all computers which are turned on.
HomeGroup
Double clicking on any of them will open up all their shared files, folders and devices. There will be no need for you to type any username & password, as it was the case in older versions of Windows.

How to Leave a HomeGroup

If you want to leave your HomeGroup, first you need to open up the HomeGroup control panel. Then, click on the 'Leave the homegroup' link.
HomeGroup
You will be asked what exactly you want to do. Click again on 'Leave the homegroup'.
HomeGroup
After a few seconds you will receive a notification that the procedure was finished successfully. Click on Finish and you are done.

Known Issues & Solutions

If you are trying to connect to your HomeGroup but you receive an error message saying that 'The password is incorrect', even though you have typed the password correctly, it means you might have encountered what it seems to be a bug. According to Microsoft, this can happen because the computer's date and time does not match the date/time of the system that owns the HomeGroup. In this case, the only solution is to adjust the date/time settings on the system joining the Homegroup, to match the system that owns the Homegroup, and then try to join again.
The system that owns the HomeGroup is the system on which the HomeGroup was first created.

Video Guide

In case you are not very keen on following our text tutorial, we managed to find also a good video guide of the HomeGroup feature.

Conclusion

As you can see from this article, HomeGroup is a great feature which simplifies a lot the process of sharing content and devices between your home computers. In the past, the most trivial file sharing meant going through a lot of steps and frustration. With HomeGroup and Windows 7, home networking is now simpler and more efficient. Since this is such a great feature, we will publish other articles, which will cover in more detail how to share anything you want to via your HomeGroup. Until then, if you have some cool tips you would like to share about HomeGroup, don't hesitate to leave a comment.

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Best Web Hosting